The Q-Cover: Because Your Rig Deserves a Little Bling
The Q-Cover: Because Your Rig Deserves a Little Bling
Your fire truck is already loud enough—why not make it look just as bold? This Decorative Front Grill Cover is an aftermarket, custom-designed accessory meant for one thing: turning heads. It won’t make your siren louder (that’s on you), and it won’t make your response times faster (again, that’s on you), but it will make your crew proud.
With a variety of background and color options, you can slap your department’s logo and custom text on it, giving your rig the personality it deserves. Whether you want it to look sharp, intimidating, or just a little extra, this Q-Cover has you covered—literally.
Effortless Installation (cause effort is for promotional processes)
No holes, no hassle, no angry mechanics. This non-invasive installation uses high-quality 3M double-stick tape to securely attach to your siren without the commitment issues of bolts or screws. It stays put when you need it, and when it's time for a change, removal is as easy as your last shift was supposed to be.
Disclaimer: Will not protect your siren from bugs, birds, or bad decisions.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.
This Decorative Front Grill Cover (“Q-COVER”) is an aftermarket, custom-designed accessory intended solely for decorative purposes. The Product is not manufactured, endorsed, or approved by Federal Signal Corporation or any original equipment manufacturer (OEM).
Taylor’s Tins conducted unofficial in-house testing, which indicated an average sound reduction of less than 5dB when the Product is installed. However, these results are not certified by any regulatory body or third-party testing organization, and actual performance may vary depending on installation, environmental conditions, and other factors. Taylor’s Tins makes no guarantees regarding the Product’s impact on siren effectiveness, audibility, or compliance with any local, state, or federal emergency vehicle regulations. It is the sole responsibility of the purchaser and/or user to ensure compliance with all applicable laws and standards.
This Product attaches using 3M double-sided adhesive tape. Taylor’s Tins is not responsible for improper installation, adhesion failure, or any damage to the siren, vehicle, or any other property. Furthermore, Taylor’s Tins shall not be held liable for any reduction in siren effectiveness, response delays, legal consequences, accidents, injuries, or any other direct, indirect, or incidental damages resulting from the use of this Product.
By installing or using this Product, the purchaser and/or user acknowledges and accepts full responsibility for any and all consequences of its use.
If you do not accept these terms, do not install or use this Product.